Can anyone offer instructions on the removal of an SC headlight. Moisture is the problem. Anyone removed the unit and applied silicon around the seal where the glass joins the housing? Any guidance would be greatly appreciated.

Atom

Driver
5/15/00 5:28:31 am

Re: How to remove a headlight? PlatinumSC300 
There is one obvious screw under the hood towards the radiator and there are two other hidden nuts located inside the fender (right behind the turn-signal). To reach it, you have to open the wheel well cover.

Registered User
5/15/00 1:54:12 pm

Re: How to remove a headlight? sc300tt 
Platinum's directions will get the light out for you. To then take it apart be prepared for a pain. You will have to slowly heat the seam where the metal clips are all the way around the light. You may have to slip a thin knife in to help remove the glue. I'd then thoroughly clean the interior and reassemble and glue. Take your time and don't cut any corners, or you'll regret it. 


Clint
92 SC300TT BPU/6spd/NOS